EX-Equipment > PCB PIEZOTRONICS 352A24 акселерометр

PCB PIEZOTRONICS 352A24 акселерометр

027137-07022 PCB Piezotronics PCB L&T Hand Torque Angle Wrench, w/Angle Encoder & Auto-ID, 200 in-lb (22.7 Nm), 12-inch Handle, 3/8-inch Square Drive, 10-pin PT Receptacle
039050-51201 PCB Piezotronics PCB L&T Rotary Torque Only Transducer, w/Auto-ID, 200 Nm (148 lbf-ft), 1/2-inch Square Drive, 10-pin PT Receptacle
039201-53102 PCB Piezotronics PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 1,000 lbf-ft (1356 Nm), 1-inch Square Drive, 10-pin PT Receptacle
039225-51015 PCB Piezotronics PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 15 Nm (132 in-lb), 1/4-inch Square Drive, 10-pin PT Receptacle
039230-50101 PCB Piezotronics PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 100 lbf-in (11.3 Nm), 1/4-inch Hex Drive, 10-pin PT Receptacle
039230-51015 PCB Piezotronics PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 15 Nm (132 in-lb), 1/4-inch Hex Drive, 10-pin PT Receptacle
039625-00183 PCB Piezotronics PCB L&T Rotary Torque Angle Transducer, w/Auto-ID, 18,000 lbf-ft (24,000 Nm), 2 1/2-inch Square Drive, 10-pin PT Receptacle
054230-01404 PCB Piezotronics PCB L&T Fastener Force Washer, Metric, M30, 400 kN 89.9 klbf), 5-ft Integral Cable w/pigtails
079A24 PCB Piezotronics Microphone stand to holder adaptor
080A05 PCB Piezotronics Magnetic mtg base, w/10-32 tapped hole and 10-32 to 1/4-28 stud (Models 080A07 & 081A08)
080A153 PCB Piezotronics Easy mount triaxial block, plastic, 1.265" sq.
080A170 PCB Piezotronics Adhesive mtg base (for Model 356A71)
080A173 PCB Piezotronics Quick clip adhesive mtg base (for Models 333B40 & 333B50)
080A24 PCB Piezotronics Petro wax, includes (4) 1" x 1" x 0.25" squares (for accel adhesive mtg)
080B11 PCB Piezotronics Triaxial mtg adaptor, 1.25" cube, anodized aluminum (for accels with up to 0.75" hex base)
081A45 PCB Piezotronics Socket head cap screw, 6-32 x 0.625" long
081B20 PCB Piezotronics Mounting stud, 1/4-28 to 1/4-28 x 0.365" long, BeCu w/shoulder
084A08 PCB Piezotronics Extender - steel, 0.6" dia. (for Models 086C01 through 086C04)
084B04 PCB Piezotronics Hammer Tip - plastic insert, white (medium) (for models 086C01, C02, C03, C04, D05)
085A07 PCB Piezotronics Tip - vinyl insert, red, 0.187" ID x 1/4" long (for Model 084B11)
086D05 PCB Piezotronics Modally Tuned® Impulse Hammer w/force sensor and tips, 0 to 5k lbf, 1 mV/lbf (0.23 mV/N)
102B06 PCB Piezotronics High frequency ICP® pressure sensor, 500 psi, 10 mV/psi, 3/8-24 mtg thd, accel. comp., ground isolated
103B11 PCB Piezotronics Acoustic ICP® pressure sensor, 10 psi, 500 mV/psi, integral 2-wire cable, accel. comp.
111A02 PCB Piezotronics 111A03 General purpose pressure sensor, 100 psi, 0.44 pC/psi, 0.218" dia. diaphragm
112B10 PCB Piezotronics 115A04 Engine Combustion Pressure Sensor
1203-02B PCB Piezotronics PCB L&T Load cell, low profile, 1,000 bf rated capacity, 50% static overload protection, 2mV/V output, 5/8-18 UNF female thread, PC04E-10-6P connector, steel construction
1204-02B PCB Piezotronics PCB L&T Load cell, low profile, 25k lbf rated capacity, 50% static overload protection, 3mV/V output, 1 1/4 -12 UNF female thread, PC04E-10-6P connector, steel construction
1204-12A PCB Piezotronics PCB L&T load cell, low profile, 25,000 lbf rated capacity, 50% overload protection, 4.0mV/V output 1 1/4-12 UNF thread, PTO2E-10-6P connector.
121A23 PCB Piezotronics Industrial ICP® pressure sensor, 5000 psi, 1 mV/psi, 1/4-18 NPT mtg thd, 2-pin MIL conn., case isolated
134A02 PCB Piezotronics Tourmaline pressure bar, 20k psi, 0.1 pC/psi, charge output, 0.2 microsecond rise time
134A23 PCB Piezotronics Tourmaline ICP® pressure bar, 10k psi, 0.5 mV/psi, 0.2 microsecond rise time
137B21A PCB Piezotronics Quartz, free-field, ICP® blast pressure pencil probe, 1000 psi, 1 mV/psi, 10-32 connector
138A11 PCB Piezotronics Tourmaline ICP® underwater blast sensor, 4.2" length, 10k psi, 0.5 mV/psi
138A50 PCB Piezotronics Tourmaline ICP® underwater blast sensor, 7.6" length, 50k psi, 0.1 mV/psi
1404-03A PCB Piezotronics PCB L&T Fatigue load cell, low profile, 25k lbf rated capacity, 100% static overload protection, 1.75mV/V output, 1 1/4 -12 UNF female thread, PT02E-10-6P connector, steel body
203B PCB Piezotronics ICP® quartz force ring, 20k lb comp., 0.25 mV/lb
209C11 PCB Piezotronics Miniature ICP® force sensor, 1 sec DTC, 2.2 lb comp., 1 lb tension, 2200 mV/lb
221B05 PCB Piezotronics Link ICP® quartz force sensor, 5k lb comp., 1000 lb tension, 1 mV/lb
227C PCB Piezotronics Link ICP® quartz force sensor, 50k lb comp., 30k lb tension, 0.1 mV/lb
2301-02A PCB Piezotronics PCB L&T Reaction Torque Transducer, 5,000 in-lb/417 ft-lb (565 N-m) rated capacity, 50% static overload protection, 4-in (101.6 mm) Steel Flange
2302-02A PCB Piezotronics PCB L&T Reaction Torque Transducer, 20k in-lb/1,667 ft-lb (2.3 kN-m) rated capacity, 50% static overload protection, 5-in (127 mm) Steel Flange
2508-02A PCB Piezotronics PCB L&T Reaction Torque Transducer, 100 in-lb/8.3 ft-lb (11 N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm) Steel Flange
2508-04A PCB Piezotronics PCB L&T Reaction Torque Transducer, 500 in-lb/41.7 ft-lb (56.6 N-m) rated capacity, 50% static overload protection, 2-in (50.8 mm) Steel Flange
301A11 PCB Piezotronics Calibration ICP® accel., 100 mV/g, 50g, 0.5 to 10 kHz, 10-32 side conn., 1/4-28 thd on bottom, 10-32 thd on top
320C33 PCB Piezotronics ESS high sensitivity, quartz shear ICP® accel., 100 mV/g, 1 to 4k Hz, 10-32 side conn., to +325 F/+163 C
351B11 PCB Piezotronics Cryogenic, miniature quartz shear ICP® accel., 5 mV/g, 1 to 10k Hz, 5-44 side conn. (-320 to +250F/-196 to +121C)
352C65 PCB Piezotronics Platinum Stock Products, High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 5-44 side conn.
352C66 PCB Piezotronics High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 5-44 top conn.
352C68 PCB Piezotronics High sensitivity, miniature (2 gm), ceramic shear ICP® accel., 100 mV/g, 0.5 to 10k Hz, 10-32 top conn.
353B18 PCB Piezotronics High frequency, quartz shear ICP® accel., 10 mV/g, 1 to 10k Hz, 10-32 top conn.
353B51 PCB Piezotronics High sensitivity, quartz shear ICP® accel., 500 mV/g, 1 to 2k Hz, 10-32 side conn.
357B54 PCB Piezotronics Charge output accel., 100 pC/g, 150g, 3kHz, 10-32 top conn., high temp. +550 F (+288 C), Rad Hard
357B83 PCB Piezotronics High temp. (to +550 F), case isolated, differential accel., 100 pC/g
3711B1150G PCB Piezotronics Platinum Stock Products, MEMS DC accelerometer, 40 mV/g, +/-50 g range, 0 to 1000 Hz, 4-pin connector
3713B1150G PCB Piezotronics Platinum Stock Products, Triaxial MEMS DC accelerometer, 40 mV/g, +/-50 g, +6 to 30 VDC excitation
3741B1210G PCB Piezotronics Differential MEMS DC accelerometer, 200 mV/g, 10 g, 0 to 1000 Hz, through hole mtg., 10 ft integral cable
377A13 PCB Piezotronics 1/2" pressure, prepolarized condenser microphone typical sensitivity= 12.5 mV/Pa (+/-2 dB), 4 Hz to 20 kHz (+/-2 dB).
378B02 PCB Piezotronics 1/2" prepolarized free-field condenser microphone, 50 mV/Pa (+/-1.5 dB), 3.15 Hz - 20 kHz (+/-2 dB) with 1/2" ICP® preamplifier (426E01) and TEDS
393B05 PCB Piezotronics Seismic, miniature (50 gm), ceramic flexural ICP® accelerometer, 10 V/g, 0.6 to 450 Hz, 10-32 top connector
4115A-109-04A PCB Piezotronics PCB L&T Torque sensor, rotary transformer,550 in-lbs FS, Flanges & splines, special female spline
4115K-09A PCB Piezotronics PCB L&T Torque sensor, rotary transformer, 2400 in-lb FS, flanges & splines per AND 10262 & AND 20002
602D11 PCB Piezotronics Low profile, industrial, ceramic shear ICP® accel., 100 mV/g, 0.4 to 8000 Hz, side exit, 10-ft integral cable, single point ISO 17025 accredited calibration
603C05 PCB Piezotronics General purpose, industrial, ceramic shear ICP® accel., 50 mV/g, top exit, 2-pin conn., single point ISO 17025 accredited calibration
605B11 PCB Piezotronics Biaxial ring-style, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 5k Hz, side exit, 10-ft integral cable, biaxial single point ISO 17025 accredited calibration
608A11/020BZ PCB Piezotronics Low cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 20-ft integral cable
623C01 PCB Piezotronics High-freq., industrial, ceramic shear ICP® accel, 100 mV/g, 0.8 to 15k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration
626B01 PCB Piezotronics Low freq., industrial, ceramic shear ICP® accel, 100 mV/g, 0.2 to 10k Hz, top exit, 2-pin conn., frequency sweep ISO 17025 accredited calibration
627A61 PCB Piezotronics Low-cost, industrial, quartz shear ICP® accel., 100 mV/g, 0.3 to 10k Hz, top exit, 10-ft integral armor cable, single point ISO 17025 accredited calibration
629A61 PCB Piezotronics Triaxial, industrial, ceramic shear ICP® accel., 100 mV/g, 0.8 to 8k Hz, side exit, 10-ft integral armor cable, triaxial frequency sweep ISO 17025 accredited calibration
640B07 PCB Piezotronics 4-20mA transmitter
640B12 PCB Piezotronics Industrial vibration sensor, 4 to 20 mA output, 0 to 2 in/sec pk, 3 to 1k Hz, top exit, integral polyurethane cable
641B01 PCB Piezotronics Industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec RMS, 10 to 1k Hz, top exit, 2-pin conn.
641B11 PCB Piezotronics Industrial vibration sensor, 4 to 20 mA output, 0 to 1 in/sec RMS, 10 to 1k Hz, top exit, 10-ft integral cable
642A12 PCB Piezotronics Industrial vibration sensor, 4 to 20 mA output, 0 to 2 in/sec pk, 3 to 1k Hz, side exit, 10-ft integral cable
646B00 PCB Piezotronics Industrial vibration sensor, 4 to 20 mA output, 0 to 10 g's RMS, 3 to 1k Hz, top exit, 2-pin conn.
649A04 PCB Piezotronics USB Programmable 4-20 mA Transmitter
66213PPZ2 PCB Piezotronics Embeddable accel, 100 mV/g low power
686B02 PCB Piezotronics USB programmable electronic vibration switch with 2-pin MIL-C-5015 connector
686B63 PCB Piezotronics SMART VIBRATION SWITCH
686B71 PCB Piezotronics USB programmable electronic vibration switch with 2-pin terminal connector & 1/4" NPT mount
686B73 PCB Piezotronics Smart Vibration Switch w/ Terminal Block
686C01 PCB Piezotronics USB programmable electronic vibration switch with 2-pin MIL-C-5015 connector, 120 cpm (2 Hz) low frequency
EX607A11 PCB Piezotronics Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft integral cable & swiveler base, single point ISO 17025 accredited calibration
EX607A61 PCB Piezotronics Low profile industrial ICP® accel, 100 mV/g, 0.5 to 10k Hz, side exit, 10-ft armored jacketed cable & swiveler base, CENELEC approved intrinsically safe, single point ISO 17025 accredited calibration
EX611A20 PCB Piezotronics High temperature,intrinsically safe, charge mode accelerometer, 10 pC/g sensitivity, 1200 degree F, 10 ft integral hard-line cable.
EX641B70D PCB Piezotronics 4-20mA 0 to .5 inches/sec, 3 to 1000Hz, sensor in an explosion proof housing with CSA Div. 1 and Div. 2 approval and ATEX 'd
GK291D PCB Piezotronics Modally Tuned® Impact Hammer kit, 0 to 500 lbf, 10 mV/lbf, w/ 2 ea. x1, x10, x100 gain signal cond.
HT622A01 PCB Piezotronics Model 622A01 with high temperature range option (+325 F/+163 C)
HT641B12 PCB Piezotronics 4-20 MA TRANSMITTER
M1102-03A PCB Piezotronics Canister load cell, 1 kN (200 lbf) rated capacity, 50% static overload protection, 2mV/V output, M6 X 1-6H threads, PT02E-10-6P connector, aluminum construction
M1102-04A PCB Piezotronics Canister load cell, 1.5 kN (300 lbf) rated capacity, 50% static overload protection, 2mV/V output, M6 X 1-6H threads, PT02E-10-6P connector, aluminum construction
M1403-02B PCB Piezotronics Fatigue load cell, low profile, 2.5 kN rated capacity, 100% static overload protection, 1mV/V output, M16x2-4H female thread, PC04E-10-6P connector, steel construction
M1403-03B PCB Piezotronics Fatigue load cell, low profile, 5 kN rated capacity, 100% static overload protection, 1mV/V output, M16x2-4H female thread, PC04E-10-6P connector, steel construction
M1404-03A PCB Piezotronics Fatigue load cell, low profile, 125 kN rated capacity, 100% static overload protection, 1.75mV/V output, M33x2-4H female thread, PT02E-10-6P connector, steel construction
VO625B01 PCB Piezotronics VELOCITY OUTPUT 100 MV/(IN/S) SIDE EXIT
357C72 PCB Piezotronics Charge output accel., 50 pC/g, 500 g, to 2.5 kHz, 2-pin connector, 3-hole mount, to +900 F
66192CPZ1 PCB Piezotronics Low cost embeddable accelerometer, low profile TO-5 with 5 pC/g sensitivity, 2-wire charge output, positive output, header pins
112A PCB Piezotronics 112A03 High sensitivity pressure probe, 3000 psi, 1 pC/psi, 0.218" dia. diaphragm, accel. comp.
GK291D05 PCB Piezotronics Modally Tuned® Impact Hammer kit, 0 to 5k lbf, 1 mV/lbf, w/2 ea. x1, x10, x100 gain signal cond.

To clarify the prices and terms of delivery please send requests by e-mail: LPTX@LPTX.RU.

We are looking forward to a long and beneficial cooperation!

Request form

refresh